To provide perimeter security of the highest integrity, Magal offers a state-of-the-art designed DTR, which is a high-end taut wire Perimeter Intrusion Detection System. A fine combination of physical deterrent barriers along with a sophisticated detection system, it emerges as the most effective security solution. DTR is a standalone security solution featuring a taut-wire fence as a sensor.
With a lifespan of over 30 years, this security system is known to deliver exceptional performance in diverse weather conditions, from high winds to snowstorms. This PIDS is an ideal solution for any facility security where aggressive physical barriers and visual deterrents are essential, as this system is resilient to tough environmental conditions and is known for providing unmatched reliability. The system is known for its low False Alarm Rate and high Probability of Detection that ensure trusted and reliable performance.
How it Works?
Taut wire-based technology is regarded as the most robust solution for detecting perimeter intrusion. The DTR technology integrates multiple detectors and each detector is connected to a pair of barbed wires having multiple sensors in each zone. This makes it a highly redundant system that has low or no failure.
This solution is highly cost-effective for wall-mounted applications and has multiple twisted barbed wires that are separated at a distance of 9-20 cm intervals and are generally stretched along a distance of 50 meters. Sensor posts are mounted with DTR sensors that are placed halfway between adjacent anchor posts.
Multiple tensioned barbed wires run between the anchor posts, which are supported and spaced by spirals. Every sensor gets clamped to two adjacent wires and in case if wire is cut or deflected, an alarm is raised. The close spacing of the wires makes it difficult for any intruder to penetrate through them without causing an alarm.
The sensors in every post are divided into a maximum of six separate alarm groups for alarm reporting purposes. This further allows isolation of the compromised section of the fence as bottom, middle, and top sections. In the case of proper analysis, one can distinguish climbing scenarios from the intrusion types. This will even eliminate irritant alarms caused by small animals and lead to better fault isolation.
What are the Uses and Applications of Taut Wire IDS?
DTR’s taut wire intrusion detection system has garnered a good reputation for successfully preventing and detecting perimeter intrusion attempts over the years. This system is also known for maintaining the lowest false alarm rate. This intrusion detection system is widely used in all terrain and environmental conditions including desert and tundra conditions.
This system is considered ideal to be used across long perimeters such as borders or remote sites that have minimal infrastructure along with harsh climate installations. Some other major applications of this system include:
- This security system is also ideal for high profile Critical Infrastructure Protection like nuclear facilities, military sites, and other sensitive locations like airports, energy utilities, and prisons.
- The DTR taut wire intrusion detection system requires minimal maintenance and hence is extensively used along hostile perimeters.
- This system can be installed as a stand-alone or wall or roof mounted and also as an addition to an existing structure.
- It can also be installed on gates to provide uninterrupted protection and detection.
Features of Taut Wire Perimeter Intrusion Detection System
DTR is a high performance physical barrier combined with multiple high quality sensors. Taut wire is considered the most reliable and robust solution for perimeter intrusion detection. This system comes equipped with multiple features including:
- Detection Capabilities: This system has high detection capability and it triggers alarms when 15-30 kg of force or more is applied to the barbed wire. An attempt to cut, climb, or spread the wire is immediately detected by the system.
- Low or No False Alarm Rate: DTR is known for producing less than one false alarm per kilometer in three months and has a significantly low false alarm rate.
- Accurate Detection: The DTR taut wire intrusion detection system is known for accurately locating intrusions even in case of multiple simultaneous intrusions.
- Long Lifespan: This intrusion detection system has a lifespan of over 30 years.
- Perform in Every Weather Condition: This security system performs well in every weather condition and it remains unaffected by wind, temperature changes, rain, hail, snow, dust, and UV radiation.
- Installation in Various Locations: This security system can be easily installed on rooftops, walls, and even gates.
- Affordable: The taut wire system consumes very low power and requires less maintenance.
- Integration with Another System: The taut wire security system can be easily integrated with other systems like CCTV, transmitters, and flood lights.
Why Buy Taut Wire from Magal Security Systems?
Magal Security Systems (India) Ltd. is a pioneer of integrated security solutions and specializes in protecting critical infrastructure across India and abroad. The company established in 2012, offers a comprehensive suite of security products and services. The company is known for rendering end-to-end turnkey solutions for critical infrastructure sectors and border security.
- The taut wire intrusion detection system of Magal empowers customers through unified security solutions.
- The security system is known for enhanced technological and operational capabilities.
- The system can be integrated with other in-house developed systems or other security systems, maximizing efficiency and effectiveness.
- The company holds expertise in designing and delivering end-to-end turnkey security solutions for diverse outdoor areas.
- The company has carried out over 100 installations in over 100 countries
- The company has executed around 2500 security projects worldwide
- Develop comprehensive security solutions designed to address vulnerable outdoor areas
- Take full installation responsibility
- Continuously update and refine proactive security approach