With the rising security concern amidst residential and commercial sites, a vast array of security solutions are dominating the market. However, customers can pick a security solution depending on the area that has to be protected and the level of security required. Intruders today are aware of diverse security surveillance systems and have found means to bypass these systems, so businesses should look for options that are not easily visible.
One such solution is the vibration sensor-based perimeter intrusion detection system or PIDS. PIDS makes use of vibration sensors that detect vibrations on fences, walls, or other perimeter structures caused due to activities like climbing, cutting, or tampering. If anyone attempts to cut or climb through the perimeter, the vibrations caused on the perimeter are detected by the vibration sensors, and unauthorized intrusion attempts are prevented.
Working of Vibration Sensor-based PIDS
Vibration Sensor Based PIDS is a well-designed security system that easily and aptly detects unauthorised attempts along a secured boundary. This system works by picking up vibration on the perimeter that is caused due to intrusion attempts and detects potential intruders. The sensor in the PIDS identifies vibrations caused by climbing or cutting and converts mechanical vibrations into electrical signals after differentiating between normal environmental vibrations and suspicious activities. The security system comes equipped with advanced algorithms and machine learning to reduce false alarms and ensure high sensitivity to actual threats. Find below a step-by-step process of the vibration sensor-based PIDS:
- Sensor Installation: A vibration sensor-based PIDS is installed along the perimeter such as a fence or walls and then the sensor is calibrated to detect potential intrusion in case any vibration occurs on the perimeter.
- Detection and Monitoring: The vibration sensor in the PIDS continuously monitors for unauthorised movement or vibration and if an intrusion is detected, the sensor sends a signal to the control unit.
- Signal Processing: The control unit on receiving the signals processes them to determine whether they indicate a genuine intrusion. The data is analysed using pre-set parameters to filter out false alarms generated due to animals, weather, or any non-threatening movements.
- Generate Alert: On the confirmation of the genuine intrusion, the alarm system gets activated by the control unit to alert security personnel either through real-time notifications like SMS, email, or through an app, depending on the configuration of the system.
- Response to the Incident: Security personnel monitors the situation through user interfaces like video feeds from integrated CCTV. Later on, they assess the situation to confirm the type of threat and decide on the appropriate action.
- Documentation and Reporting: The security system logs the incident along with the time, location, and intrusion nature for future analysis and reference. A review is conducted on the incident by the security teams to enhance response strategies and the performance of the system.
Different Vibration Sensor based PIDS Available in the Market
Vibration sensor-based PIDS are designed to provide high performance intruder detection capability when installed on fences or other barriers that define the perimeter of a secured site. This sophisticated yet easy-to-install intrusion detection system is based on well-established engineering principles to ensure optimum detection performance aligned with a reduce false alarm rate. Vibration sensor-based PIDS are cost-effective, and versatile, making them ideal for securing industrial facilities, military sites, and critical infrastructure against unauthorized access and sabotage. Some common types of vibration sensor-based PIDS available in the market include:
- Flexzone: Flexzone is a fence-mounted vibration sensor-based intrusion detection system that detects and locates any attempt to cut or climb through the fence. This highly advanced security system locates intrusions even in the case of multiple simultaneous intrusions and there is environmental noise in the background. FlexZone perimeter intrusion detection system can be installed in a wide range of fence types such as chain-link, welded mesh, concertina coil, barbed wires, anti-crash barriers, and palisade.
- Fensor: Fensor is a game-changer in the perimeter security system having optimised intrusion detection capabilities. This highly advanced vibration sensor-based PIDS is equipped with accelerometer technology for intrusion detection. Its adaptive technology makes use of proprietary algorithms to minimize false alarms caused due to pedestrian activity or vehicle movements. This system can be installed on different types of fences and hence it is compatible with existing security setups.
Benefits of Vibration Sensor Based PIDS
Installing a vibration sensor-based Perimeter Intrusion Detection System offers multiple benefits, from enhancing security to improving the overall safety of an area or property, a Perimeter Intrusion Detection System is an ideal security solution. It is a preferred choice for securing perimeters in diverse environments due to the following reasons:
- Proactive Monitoring and Real-time Alerts: Vibration sensor-based PIDS is quick to detect potential intrusions even before they reach critical areas. This allows security personnel to timely response and potentially prevents security breaches. The security system immediately notifies security personnel, allowing them to take quick action against threats.
- Offer Enhanced Security: This security system is quick to detect unauthorized activities occurring at the perimeter like climbing, cutting, or tampering with fences or walls. Thus, it provides early warnings to security personnel and helps them in taking swift action against potential intrusions.
- Cost-Effectiveness: Vibration sensors-based perimeter intrusion detection systems are relatively affordable compared to other advanced security systems. Besides, this system also eliminates the need for manual surveillance which allows security personnel to focus on other vital tasks. This security system offers a reliable solution without excessive financial investment.
- Minimise False Alarm Rate: This perimeter intrusion detection system boasts advanced signal processing and algorithms that allow them to differentiate between genuine threats and harmless vibrations, thereby minimising false alarm rates and unnecessary disturbances.
- Scalability and Flexibility: The intrusion detection system can be ideally installed on various perimeters such as fences, walls, and barriers. The system can also be scaled to cover perimeters of diverse sizes, from small facilities to large industrial sites.
- Comprehensive Monitoring: The vibration sensor-based PIDS is efficient in covering the security of extensive areas, ranging from remote to hard-to-monitor locations. This system offers comprehensive surveillance of the perimeter. The best thing about this system is that it can be easily integrated with CCTV, alarm systems, and other access control systems for a complete security solution.
- Minimal Maintenance and 24/7 Operation: The vibration sensor of the security system is extremely durable and requires minimal maintenance. This reduces long-term operational costs. Besides, the vibration sensor-based PIDS provides round-the-clock protection irrespective of the weather conditions, ensuring 24X7 security of sensitive areas.
- Detailed Analysis and Faster Reaction Times: This intrusion detection system logs all incidents, provides valuable data for post-incident analysis, and improves response strategies. The system stores and analyses data on intrusion incidents, and provides insights into security trends, vulnerabilities, and improvement areas. With real-time alerts and monitoring features of this system security personnel quickly respond to incidents, minimizing potential damage or loss.
Vibration sensor-based PIDS equipped with multiple benefits turns out to be a reliable and efficient choice for safeguarding significant areas, critical infrastructure, military sites, and commercial facilities.
Why Shop for Vibration Sensor Based PIDS from Magal Security Systems?
Founded in 2012, the company brings extensive expertise and experience in delivering comprehensive turnkey solutions for critical infrastructure and border security. With over 50 years of expertise, Magal is a trusted name in offering comprehensive turnkey security solutions for seaports, borders, oil & gas facilities, and critical infrastructure. As the authorized distributor of Senstar products in India, Magal India empowers customers with integrated vibration-based PIDS solutions that are of advanced technology and are known for operational efficiency. Leveraging state-of-the-art security technologies, it has successfully catered to diverse sectors, including oil and gas, seaports, borders, and other critical infrastructure domains. These solutions include different types of Perimeter Intrusion Detection Systems (PIDS), video surveillance, CCTV, and access control systems. Key reasons to choose Magal for Vibration Sensor-Based PIDS include:
- End-to-End Solutions: Magal India delivers 100% turnkey PIDS solutions, managing every stage of project implementation.
- Seamless Integration – With the in-house software development facilities, PIDS can be easily integrated with existing or new hardware, reducing project costs and execution time.
- Cost-Effective Security: Provide tailored solutions that optimize security performance within budget.
- Collaborative Approach: Work closely with security consultants to assess specific needs and operational requirements.
- Comprehensive Coverage: Render proactive security solutions that effectively address the security challenges of vulnerable outdoor areas.
- Expertise and Alignment: Vast experience helps to design solutions that align with client’s security risk assessments, plans, and procedures.
- Training and Support: Provide thorough training to the client’s team for seamless installation and system updates.